L&T Racing News

05-02-2016
Good luck kart racers!
L&T would like to wish a successful and safe 2016 season to all our racers!

01-29-2014
L&T EXPANSION
L&T has now expanded to a larger shop. A huge thanks to every racer who has won on our clutches throughout the years! (note our new contact info)

02-07-2013
WKA DAYTONA
We would like to thank all of our customers for a successful opening round. Congradulations to Ryan Raffa for is first win in junior yamaha.


416 Lonoke St.
Dayton , Ohio
45403

Made in America

Frequently Asked Questions Forum


Search below for quick answers to common technical questions from customers.

If you cannot find your answer, ASK YOUR QUESTION HERE.



Clutch: Mini Clutch
Question: mini clutch test from faqform page
Answer:




Clutch: Wet Clutch
Question: what should i do if my clutch is engaged as soon as i start my motor/
Answer:




Clutch: Wet Clutch
Question: what should i do if my clutch is engaged as soon as i start my motor/
Answer:




Clutch: Other Clutch
Question: Hi, Have been running a full size 1 disc dry with wave washers in Yamaha senior supercan. Have opportunity to move to the 2 disc mini. Should I make this move or is the 1 disc full still a viable clutch for this application. Thank You
Answer:
John,
That clutch is still a good option, but you will probably be happier with the 2 disc mini.



Clutch: Wet Clutch
Question: How to set oil level and can dexron 3 or 10w30 be used as oil for clutch.
Answer:
Collin,
There are level lines on gold cover of clutch. Put the line on the right just below center. Take fill plugs out. Put oil in from top left hole until oil comes out bottom right hole. Put fill plugs in and you are ready to go. Our clutch oil is specific to this application. I would not recomend using other oil. You can find our oil from the dealers on the website.
Thanks




Clutch: Wet Clutch
Question: What temp should a wet clutch run at it seems to be super hot and it is leaking from the space at the starter bolt is this normal?
Answer:
No , tyhat is not normal. That usually indicates the oil s boiling. Maybe from overslipping. Clutch may need redone.



Clutch: Other Clutch
Question: 11T Dry Clutch. I recently bought a dry clutch and installation was a snap. However now the clutch cover bearing keeps popping out of the cover after a few moments of full throttle and rattling around in the clutch and cover. I put the bearing back in the cover and re-attach but the same thing happens after a few moments at full throttle. Is there an adhesive you would recommend?
Answer:
Check to make sure snap ring is insalled after bearing. May need stretched apart if it keeps popping out.



Clutch: Wet Clutch
Question: What "fluid" do I use to fill my Wet Clutch?
I dont want to use the wrong "oil" and wreck the clutch I have. Thank You For The TIme and Effort

Answer:
Jesse,
The L&T Clutch oil is the only oil i would use. Contact dealer(list on website) or send cash or check for $27. $20 for oil and $7 for shipping and we can send you a bottle.
Thanks



Clutch: Technical Support
Question: Running a 2-disc WET l&t for my son in Yamaha JR can in Lansing, Michigan. Is a dry 2 disc faster? For the WET what RPM do i set stall at? Thanks Ron.
Answer:
Ron,
Stall speed is between 8400-8700rpm (some like up to 9100 rpm) for both wet and dry. Yes the 2 disc mini (dry) will be a bit quicker with a consistent driver behind the wheel.



Clutch: General Support
Question: Hello. What is the charge to rebuild a 2 disc wet L&T 10 tooth drive gear clutch? Will I just ship it to the 801 Factory Rd address? Thanks.
Answer:
Gregory,
It will cost approx. $100-$125 depending on what all needs done. Yes just send to 801 with your name and other info on paper in box.
Thanks,
Jeff




Previous 1 2 3 4 5 Next